Battery Cable Assemblies
All battery/inverter cables are UL approved
Use these cables between a battery bank and inverter, fuse or power center. They have flexible stranded UL Listed copper wire and 3/8" or 5/16" diameter stud hole lugs. Lug barrels are covered with glue-filled heat-shrink tubing. Cables are marked in red heat-shrink tubing for positive and white heat-shrink on black wire for negative. Circuits protected by 250 A breakers or 400 A fuses should use 4/0 cables. Use 2/0 cables for 175 A breakers and 200 A fuses. Use #2 cables for 110 A or smaller fuses or breakers. Cables with red ends are for positive battery parallel jumpers. Cables with white ends are for negative battery parallel jumpers. Cables with black both ends, or red and black ends, are used for series battery interconnects
Battery Cable Assemblies

 


4/0 Battery Cables
4/0 Battery Cables

2/0 Battery Cables
2/0 Battery Cables

2AWG Battery Cables
2AWG Battery Cables

4AWG Battery Cables
4AWG Battery Cables

6AWG Battery Cables
6AWG Battery Cables








 
Powered by Fortune3